In nearly all situations, most people spend quite a bit of money buying their forklift. Hence, it is really important to take good care of it so as to protect your investment well into the long run. It is a great idea to know the procedures which are carried out during maintaining and taking care of this machine.
By starting up the forklift and listening carefully how it runs is amongst the best ways to tell how good the engine is running. For instance, if there are any knocks or misses, the equipment is faulty and this must raise some concerns. Additionally listen closely for any squealing noise that come from the belts since these sounds would provide you with a lot of information.
Some of the main parts needing attention during maintenance consist of the gauges, horn, safety warning devices, the overhead guard and the lights. Any faulty components or burnt out light bulbs should be replaced as soon as they are noticed. It is also vital to check the wiring.
The battery compartment terminals must be cleaned when the above parts have been inspected thoroughly. If the terminals are not clean, be sure to clean them well. Each and every battery cell needs to be checked so as to ensure the fill level is topped up to the regulated amount.
The next step is to drain all of the oil out of the machinery and then change the filters. The fuel filters, hydraulic filter and the transmission filter should be frequently replaced. Before fitting them, be sure to write the date on the new filters by utilizing a permanent marker to be able to keep track.
When the oil change has been done and new filters have been fitted, visually check the drive axle from beneath the equipment. Be sure to grease the axle if there is any grease fitting. Check the belts on the engine for any cracks or frays. If you find any, fix the problem accordingly. Then, inspect every other part of the equipment including the wheels. If any type of concern or fault is detected, be sure to deal with it immediately in order to make sure the equipment is running at its safest and optimum levels.