Forklift Battery Safe Installation and Charging
Lift truck batteries are fairly big and are extremely expensive pieces of machines. They weigh thousands of pounds. The task of installing and charging these batteries is something that should be really planned out in advanced in order to make certain that these methods could be done properly and safely. Maintaining a sound charging method and correct handling could really increase the battery's standard life span.
Standard Charging
It is important not to connect the battery to the charger until it is at 20% capacity or less. By charging the battery when it is higher than 20%, the lifespan of the battery could actually be shortened. On about every 5th charge cycle, the charger must be set on the equalize or weekend setting, depending on which model of charger you are using.
The charging cycle must never be interrupted. Once the charge cycle is done, you should avoid utilizing the battery for some hours. By practicing these procedures, you could help make certain that you get the maximum battery performance available.
Charger Maintenance
Make sure the charger is turned off prior to hooking up the battery to the charger. You then could connect the charger to the battery. This is a common mistake which could accidentally cause damage to both the charger and the forklift. What's more, it is really vital that the amperage of the battery should match that of the charger.
The battery must never be allowed to completely discharge or deep discharge. This will ultimately shorten the lift of the battery and can even prevent the charger from being able to activate. If the battery charger reads that there is no activity in the battery, it will not start the charge cycle. If this situation happens, a technician should be called to be able to re-set the charger prior to charge being able to start.